Computer room cleaning procedures can both be easy and quick and will not take up a lot of your time. Dust particles that gather over time and get sacked into the system often end up creating a short circuit in the system eventually killing it. Areas that accumulate dust are in the computer air ducts, on the floor and of course on fixtures.
With a clean lit free and non static cloth clean the surface of the equipment gently for a thorough tidy up you can use a home dry solution that evaporates immediately on application. Use a blower or a vacuum to clean out the dust that could be stuck in the air ducts having been pulled in by the fans. When doing the tidying up always disconnects all the equipment from the mains.
Cartons and other unnecessary packaging should not be kept in the said abode they should be stored away from it. Also all equipment should not be placed on the floor as this is a risk hazard. Daily keep the floor and walls clean and clutter free.
Thoroughly damp clean the floor weekly after vacuuming it to make sure that no dust residue is left behind. By damp cleaning you ensure that any excess dust left behind after vacuuming is lifted off by the wet cloth. Use of soaps is highly discouraged as some of this soaps contain harmful corrosive chemical agents.
If using any type of equipment to raise the equipment off the ground, remember to remove it clear of the ground and clean the underneath thoroughly. Also if using raised floors regularly at least twice a year do a thorough check of the floor and remove any debris left underneath. Use a vacuum cleaner to get the dust out and not have it sacked into the systems you are trying to protect from damage.
Regulate the amount of movement from and into the abode. computer room cleaning is a simple procedure that can be done even on a daily basis and which will ensure that your systems serve you at optimum levels at all times. To minimize the risks also consider keeping printers and such peripheral devices in a separate but conjoined rooms.
With a clean lit free and non static cloth clean the surface of the equipment gently for a thorough tidy up you can use a home dry solution that evaporates immediately on application. Use a blower or a vacuum to clean out the dust that could be stuck in the air ducts having been pulled in by the fans. When doing the tidying up always disconnects all the equipment from the mains.
Cartons and other unnecessary packaging should not be kept in the said abode they should be stored away from it. Also all equipment should not be placed on the floor as this is a risk hazard. Daily keep the floor and walls clean and clutter free.
Thoroughly damp clean the floor weekly after vacuuming it to make sure that no dust residue is left behind. By damp cleaning you ensure that any excess dust left behind after vacuuming is lifted off by the wet cloth. Use of soaps is highly discouraged as some of this soaps contain harmful corrosive chemical agents.
If using any type of equipment to raise the equipment off the ground, remember to remove it clear of the ground and clean the underneath thoroughly. Also if using raised floors regularly at least twice a year do a thorough check of the floor and remove any debris left underneath. Use a vacuum cleaner to get the dust out and not have it sacked into the systems you are trying to protect from damage.
Regulate the amount of movement from and into the abode. computer room cleaning is a simple procedure that can be done even on a daily basis and which will ensure that your systems serve you at optimum levels at all times. To minimize the risks also consider keeping printers and such peripheral devices in a separate but conjoined rooms.
0 comments:
Post a Comment